scale, rotate and translate
To wrap up this title we are going to cover three last major methods that manipulate the full canvas.
Keynotes:
- scaling.
- rotating.
- translating.
Video Transcript
00:00Transformations are really scaling, rotating, and translating all done at the same time.
00:05This lesson we're going to break down those steps and do each distinct item separately
00:10and literally go through scaling, rotating, and translating with their distinct functions
00:15when we want to just do one or the other on their own. And this is the last lecture of this title,
00:20so let's jump right into it. Let's jump right into it and I'm going to go right into the source
00:26area. I created the create fin, which in French means end, which relates to our title lesson really,
00:34really closely, obviously. So I already pre-configured a width, height, context, and rad for radius,
00:40and I'm going to go right ahead to show you a few more manipulations you could do to the canvas
00:44directly. As I will probably want to go back to the original state, I'm going to go ahead and call
00:49the context save because I want to get back to the original point of view at some point.
00:55I'm going to go ahead and define a new font and set it to be 120 pixels and a serif,
01:00just like we've seen previously. And I'm going to go ahead and literally go ahead and do a little
01:05bit of alignment here, text align, set it to the center, and I'm going to go ahead and before I
01:14even fill my content, I want to show you the first method. And the first method is called
01:20translate. Now translate works this way, and even before I do, let me go ahead and show you.
01:25If I go ahead to my context and I fill my text, and I send into it the words fin,
01:31and I want to position it, let's say, at 00. Notice what will happen. Well, not content,
01:38content. What will happen is because I'm positioning at position 00, well, it is out of our bounds
01:44because you can see that a little bit of it. If you have a really good site, you'll see a
01:47little piece of that dot right there. But what I really want to happen is I want this content
01:52to be in view. And yes, I could go ahead and manipulate the x and y coordinates, but there's
01:56one more way I could do it. Before calling that fill text, I'm going to go ahead and call the
02:02translate function. The translate function literally moves the 00 point to wherever we want to.
02:08In this case, I'm going to decide to move the 00 point to half of the width and half of the
02:13height. Once I've done that, if I go ahead and run my application one more time, you'll see that
02:21this time around, our copy is going to be slapped in the center, although aligned upwards from the
02:26center. The next thing that I want to do, I want to show you a few more things that we could do
02:31by manipulating the canvas itself. And I'm going to go ahead and right after we're done here,
02:36I'm going to go ahead and call the context again. But this time, I'm going to call a
02:40method called scale. The scale method accepts two parameters that will scale the horizontal
02:46and vertical axis or the x and y coordinates. And I'm going to go ahead and define it as 90%
02:52of what it was before scaling our content downwards. Everything that was already there
02:57before won't change. But now if I go ahead and call the fin function again, and I fill my text
03:03one more time, and let me even before I do that, let's define here a styling. So I'm going
03:09to go ahead here and call the context, I'm going to call fill style, and I'm going to set it to be
03:14let's set it to be a nice red, a nice sharp red. If I go ahead and click here on save,
03:20notice what's going to happen, our content is going to be resized, because every new content
03:26is now going to be 90% of what it was before. Beyond that, if I go ahead here, I want to
03:31explain another important point. If I go ahead here and duplicate this, this assignment,
03:36and do it one more time, only this time set it instead of red, I'm going to set it to blue,
03:42sorry, green RGB. And let me also do it for blue. Now, the really important factor that I wanted
03:48you to notice here, first of all, if I go ahead and do this, and I save this, and I go on and
03:52I click on refresh, you'll see that each time it's going to be slightly smaller by 90 by 10%.
03:58Beyond that, if I wanted once to decide, hey, in the last item, I actually wanted to be the
04:02original, that is not the original, all I'm doing here is scaling it to the scale that it's in,
04:07there is no recollection of the scale that the item is in. The only way for me to revert back to
04:13the original scale is by me going and actually restoring back my point by calling the restore.
04:19In this case, I don't want to, I like the fact that we're getting smaller. The next item I want
04:24to show you is I'm going to go ahead here and another function, and the last function that really
04:29we're going to see on this title, which is called rotate. Now rotate works very similarly, only it
04:34accepts radians, and it's a radians between zero and 360. So in this case, let's say I want to create
04:41a five degree rotation for the second text item. And I want to do that another five degrees,
04:47and another five degrees for each item that comes in. If I go ahead and click here on refresh,
04:52you'll see that now each item from the second item and onwards are going to be tilted. If I
04:57wanted the first item to be tilted as well, I could go ahead before I actually fill out that
05:02text and go ahead and also rotate everything. And now all the content will come in rotated
05:07every single one, every single item, every single element. Last but not least, I want to just go
05:12back and complete everything by a reminder saying that when we want to restore, we just call the
05:17restore. And now everything is back to the original configurations, which I could now decide,
05:22let me go ahead. And I want to complete this nicely. So I'm going to go ahead here and take
05:27this copy. And I want to make it I want to restyle my font to be much smaller, let's make it 20.
05:33I'm going to check take my fill style and make it black to complete our application.
05:39And last but not least, I'm going to say goodbye by typing here context, fill text.
05:48Goodbye. And I'm going to now need to position it in absolute positionings as we've had before.
05:54So let me go ahead here and I'm just going to add about 40 pixels, I believe maybe even 45.
06:00Let me add your 45 so or 46. Why not? And that's it. Goodbye. So I hope you enjoyed this title.
06:08In this lesson, we completed our manipulations of canvas and with it,
06:12you could now pride yourself as someone that masters HTML canvas.
06:16I hope you had a really, really great time. And please check more of my titles with
06:20publishing by searching my name Ben Fala on the packed site.
